Documentation : Hardware | Software | Tutorials    Wardrobe : Jackets | Applications
Papers : Notes | Proposals | Research    Administration : Stock | Minutes | Progress

Pencam USB interface documentation

The picture below shows how to interface the pencam USB to the cyberjacket.
USB needs 4 wires, power, ground, transmit and receive. The four pins sticking out under the STV0680 are the USB connector. Desolder if possible, then wire up to the 4 pins of the miniature four-pin connector as shown. Outisde on that conenctor are power (left looking from the top with the connector up) and ground, middle are the two datya wires.

HLM, 21/4/2002.


This page last updated April 26, 2002
The material displayed is provided 'as is'. Contents may not be reused without prior permission.
For problems or questions regarding this web contact Cliff Randell.